Mircom® FX-350, FA-1000, RA, (Annunciators)

FX-350, FA-1000

Master Graphic Driver Board c/w

The MGD-32 Master Graphic Driver Module provides common control inputs for the common control switches such as System Reset, Signal Silence, Auxiliary Disconnect, Fire Drill, Lamp Test, Acknowledge and General Alarm. Any or all of these switch inputs can be used. There are supervised outputs for all of the support LEDs and the common control switches. The MGD-32 can also drive up to 32 supervised outputs. These output points are capable of driving LEDs or incandescent lamps. Mounts in a graphic annunciator wallbox or in the BB-5000 enclosures. External power supply required for incandescent lamps and lamp test.

Fire Alarm Common Control Switch Inputs & LED Outputs
32 Supervised Outputs, Output Connections via Terminals or Ribbon Cable
Mounts in Graphic Wallbox or BB-5008 or BB-5014 Enclosures

Adder Graphic Driver Board

c/w 48 Supervised Outputs, Output Connections via Terminals or Ribbon Cable
Mounts in Graphic Wallbox or BB-5008 or BB-5014 Enclosures

RA-200

Remote Multiplex Annunciator c/w, 8 Bi-Coloured LEDs

Common Control Features: Signal Silence, Buzzer Silence, System Reset,
Lamp Test Indicators — A.C. On, Common Trouble & Signal. Silence
Mounts in 4 Gang Electrical Box, Red and White Finish
Used with Series 300 and Series 1000

• 8 Bi-Coloured LEDs which are automatically configured for either Alarm (Red) or Supervisory (Amber) to match the Fire Alarm Control Panels
• Signal Silence, Buzzer Silence, Lamp Test and System Reset switches
• LEDs for A.C. On, Common Trouble and Signal Silence
• Equipped with a keyswitch which allows for enabling and disabling of the Common Control functions
• Each point can be identified by the corresponding label beside the LED
• Mounts in a 4-gang electrical box by others

Remote Multiplex Annunciator

White Finish
Used with Series 300 and Series 1000

• 16 Bi-Coloured LEDs which are automatically configured for either Alarm (Red) or Supervisory (Amber) to match the Fire Alarm Control Panels
• Signal Silence, Buzzer Silence, Lamp Test and System Reset switches
• LEDs for A.C. On, Common Trouble and Signal Silence
• Equipped with a keyswitch which allows for enabling and disabling of the Common Control functions
• Each point can be identified by the corresponding label beside the LED
• Mounts in a 4-gang electrical box

Manual

Features

RA-1000

Main Annunciator Chassis (16 Zone)

The RAM-1016TZDS Main Remote LED Annunciator provides common annunciator functions and 16 points of LED annunciation. The RAM-1016TZDS has indicators for A.C. On, Common Trouble and Signal Silence and controls for System Reset, Lamp Test, Fire Drill, Buzzer Silence and Signal Silence. Each display point can be identified by the slide-in label that slides in besides the LED. The RAM-1016TZDS allows for the control switches to be disabled on a per function basis for areas that do not require certain common control functions to be remotely located from the fire alarm control unit.
The RAM-1016TZDS is a non-expandable unit that occupies one display position in the BB-1000 or BB-5000 enclosures.

c/w Common Control Features, Indicators and 16 Bi-Coloured LEDs and 16 Trouble LEDs

Main Annunciator Chassis (32 Zone)

The RAM-1032TZDS Main Remote LED Annunciator provides common annunciator functions and 32 points of LED annunciation. The RAM-1032TZDS has indicators for A.C. On, Common Trouble and Signal Silence and controls for System Reset, Lamp Test, Fire Drill, Buzzer Silence and Signal Silence. Each display point can be identified by the slide-in label that slides in besides the LED. The RAM-1032TZDS allows for the control switches to be disabled on a per function basis for areas that do not require certain common control functions to be remotely located from the fire alarm control unit. TheRAM-1032TZDS can be expanded with the additionof RAX-1048TZDS Programmable LED Annunciator Modules. The RAM-1032TZDS occupies one display position in the BB-1000 or BB-5000 enclosures.

c/w Common Control Features, Indicators and 32 Bi-Coloured LEDs and 32 Trouble LEDs

Adder Annunciator Chassis c/w 48 Bi-Coloured LEDs and 48 Trouble LEDs

The RAX-1048TZDS Programmable LED Annunciator Module provides 48 programmable bi-colored LEDs. The RAX-1048TZDS connects to the main control unit or main annunciator module when mounted remotely. Each display point can be identified by the slide-in label that slides in besides the LED. The RAX-1048TZDS occupies one display position in the BB-1000 or BB-5000 Series enclosures.

RA-300

Remote LCD Annunciator c/w White Semi Flush Enclosure

The RAM-300LCD provides control switches for System Reset, Signal Silence, Fire Drill and Acknowledge as well as a numeric keypad to access the menu functions. The common control functions can be disabled on a per-function basis.
The RAM-300LCD has LED indicators for A.C. On, Alarm, Supervisory, Trouble and CPU Fail. The RAM-300LCD is available in a red (RAM-300LCDR) or white (RAM-300LCDW) enclosure and comes complete with and a CAT-30 lock and key.